1. Savoldi F, Wong KK, Yeung WKA, Tsoi KH, Gu M, Bornstein MM. Midpalatal suture maturation staging using cone beam computed tomography in patients aged between 9 to 21 years, Scientific Reports 2022; 12: 4318-4318 doi:10.1038/s41598-022-08293-y
2. Savoldi F, Svanetti L, Tsoi KH, Gu M, Paganelli C, Genna F, Lopomo NF. Experimental determination of the contact pressures produced by a nasal continuous positive airway pressure mask: A case study, Journal of the Mechanical Behavior of Biomedical Materials 2022; 132: 105272-105272 doi:10.1016/j.jmbbm.2022.105272
3. Li K, NGO FM, Yau AYL, Tam WWL, Tse CME, Tsoi KH, Yiu CKY. Mussel-inspired monomer – A new selective protease inhibitor against dentine collagen degradation, Dental Materials 2022; 38: 1149-1161 doi:10.1016/j.dental.2022.05.002
4. Zakir M, Laiho T, Granroth S, Kukk E, Chu CH, Tsoi KH, Matinlinna JP. A novel dual surface modification on titanium in dental use: Characterization and topography, Surface and Interface Analysis 2022; 54: 747-758 doi:10.1002/sia.7087
5. Bijle MN, Abdalla MMA, Ashraf U, Siu KW, Tsoi KH, Yiu CKY. The acid-resistance potential of arginine-fluoride varnish treated enamel, Journal of the Mechanical Behavior of Biomedical Materials 2022; 125: 104763-104763 doi:10.1016/j.jmbbm.2021.104763
6. Pan Y, Tsoi KH, Lam YHW, Chen ZF, Pow EHN. Does the geometry of scan bodies affect the alignment accuracy of computer‐aided design in implant digital workflow: An in vitro study?, Clinical Oral Implants Research 2022; 33: 313-321 doi:10.1111/clr.13890
7. Pan Y, Tsoi KH, Lam YHW, Zhao K, Pow EHN. The cumulative effect of error in the digital workflow for complete‐arch implant‐supported frameworks: An in vitro study, Clinical Oral Implants Research 2022; doi:10.1111/clr.13968
8. Sunarintyas S, Siswomihardjo W, Tsoi KH, Matinlinna JP. Biocompatibility and mechanical properties of an experimental E-glass fiber-reinforced composite for dentistry, Heliyon 2022; 8: e09552-e09552 doi:10.1016/j.heliyon.2022.e09552
9. Bijle MN, Mallineni SK, Tsoi KH. Qualitative and Quantitative Micro-CT Analysis of Natal and Neonatal Teeth, Children 2022; 9: 560-560 doi:10.3390/children9040560
10. Yang W, Choi WWS, ZHU W, Zhang C, Li DTS, Tsoi KH, Tang WL, Kwok KW, Su Y. Spatial deviations of the temporomandibular joint after oncological mandibular reconstruction, International Journal of Oral and Maxillofacial Surgery 2022; 51: 44-53 doi:10.1016/j.ijom.2021.02.033
11. JIN S, Yeung WKA, Zhang C, Tsoi KH. A Bibliometric Analysis of Electrospun Nanofibers for Dentistry, Journal of Functional Biomaterials 2022; 13: 90-90 doi:10.3390/jfb13030090
12. Ashraf U, Tsoi KH, He J, Shah AT, Khan AS, Pow EHN, Matinlinna JP. Effect of novel FUDMA-TEGDMA resin on resin-dentine adhesion strength, International Journal of Adhesion and Adhesives 2022; 118: 103229-103229 doi:10.1016/j.ijadhadh.2022.103229
13. Ding H, Yang Y, Li X, Cheung GSP, Matinlinna JP, Burrow MF, Tsoi KH. A simple AI-enabled method for quantifying bacterial adhesion on dental materials, Biomaterial Investigations in Dentistry 2022; 9: 75-83 doi:10.1080/26415275.2022.2114479
14. CHEN Y, Lee JKY, Kwong G, Pow EHN, Tsoi KH. Morphology and fracture behavior of lithium disilicate dental crowns designed by human and knowledge-based AI, Journal of the Mechanical Behavior of Biomedical Materials 2022; 131: 105256-105256 doi:10.1016/j.jmbbm.2022.105256
15. YUN J, Tsui KH, Fan Z, Burrow MF, Matinlinna JP, Wang Y, Tsoi KH. A biomimetic approach to evaluate mineralization of bioactive glass-loaded resin composites, Journal of Prosthodontic Research 2022; doi:10.2186/jpr.JPR_D_21_00177
16. Guo J, Yang J, Zhao X, Bing Z, Lu D, Tsoi KH, Wang X, Wang Y. Effects of Streptococcus mutans and their metabolites on the wear behavior of dental restorative materials, Journal of the Mechanical Behavior of Biomedical Materials 2022; 135: 105469-105469 doi:10.1016/j.jmbbm.2022.105469
17. Tsoi KH, Ding H. A narrative review on the overlooked aspects of dPROs in connection with dental materials, Journal of Evidence-Based Dental Practice 2022; 101796-101796 doi:10.1016/j.jebdp.2022.101796
18. Cho EO, Cowgill LW, Middleton KM, Blomquist GE, Savoldi F, Tsoi KH, Bornstein MM. The influence of climate and population structure on East Asian skeletal morphology, Journal of Human Evolution 2022; 173: 103268-103268 doi:10.1016/j.jhevol.2022.103268
19. Savoldi F, Yeung AWK, Tanaka R, Zadeh LSM, Montalvao C, Bornstein MM, Tsoi JKH. Dry Skulls and Cone Beam Computed Tomography (CBCT) for Teaching Orofacial Bone Anatomy to Undergraduate Dental Students, Anatomical Sciences Education 2021; 14(1): 62-70 doi:10.1002/ase.1961
20. Yang WF, Choi WS, Wong MCM, Powcharoen W, Zhu WY, Tsoi JKH, Chow M, Kwok KW, Su XY. Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study, Annals of Surgical Oncology 2021; 28(1): 363-375 doi:10.1245/s10434-020-08732-y
21. Savoldi F, Massetti F, Tsoi JKH, Matinlinna JP, Yeung AWK, Tanaka R, Paganelli C, Bornstein MM. Anteroposterior length of the maxillary complex and its relationship with the anterior cranial base: A study on human dry skulls using cone beam computed tomography, The Angle Orthodontist 2021; 91(1): 88-97 doi:10.2319/020520-82.1
22. Zhang CY, Agingu C, Tsoi JKH, Yu H. Effects of Aging on the Color and Translucency of Monolithic Translucent Y-TZP Ceramics: A Systematic Review and Meta-Analysis of In Vitro Studies, BioMed Research International 2021; 2021: article no. 8875023-article no. 8875023 doi:10.1155/2021/8875023
23. DING H, Tsoi JKH, Kan CW, Matinlinna JP. A simple solution to recycle and reuse dental CAD/CAM zirconia block from its waste residuals, Journal of Prosthodontic Research 2021; 65: article no. JPR_D_20_00002-article no. JPR_D_20_00002 doi:10.2186/jpr.JPR_D_20_00002
24. Hong G, Chang TY, Terry A, Chuenjitwongsa S, Park YS, Tsoi KH, Kusdhany MFLS, Egusa H, Yamada S, Kwon JS, Seow LL, Garcia MCAG, Wong ML, Auychai P, Hsu ML. Guidelines for innovation in dental education during the coronavirus disease 2019 pandemic, Journal of Oral Science 2021; 63(1): 107-110 doi:10.2334/josnusd.20-0399
25. PAN Y, Tsoi JKH, Lam WYH, Pow EHN. Implant framework misfit: A systematic review on assessment methods and clinical complications, Clinical Implant Dentistry and Related Research 2021; 23(2): 244-258 doi:10.1111/cid.12968
26. Su RY, Yang W, Choi WWS, ZHU W, ZHANG CY, Li DTS, Tsoi KH, Tang WL, Kwok KW. Spatial Deviations of Temporomandibular Joint After Oncological Mandibular Reconstruction, International Journal of Oral and Maxillofacial Surgery 2021; doi:10.1016/j.joms.2020.07.081
27. FANG G, CHOW MCK, Ho JD, HE Z, WANG K, Ng TC, Tsoi JKH, CHAN PL, Chang HCC, CHAN DTM, LIU YH, Holsinger FC, CHAN JYK, Kwok KW. Soft Robotic Manipulator for Intraoperative MRI-guided Transoral Laser Microsurgery, Science Robotics 2021; 6(57): article no. eabg5575-article no. eabg5575 doi:10.1126/scirobotics.abg5575
28. Zhao J, Jin S, Delgado AHS, Chen Z, Matinlinna JP, Tsoi JKH. Self-Assembled PHMB Titanium Coating Enables Anti-Fusobacterium nucleatum Strategy, Coatings 2021; 11(10): article no. 1190-article no. 1190 doi:10.3390/coatings11101190
29. Kamel A, Badr A, Fekry G, Tsoi J. Parameters Affecting the Retention Force of CAD/CAM Telescopic Crowns: A Focused Review of In Vitro Studies, Journal of Clinical Medicine 2021; 10(19): article no. 4429-article no. 4429 doi:10.3390/jcm10194429
30. Albelasy E, Hamama HH, Tsoi JKH, Mahmoud SH. Influence of material type, thickness and storage on fracture resistance of CAD/CAM occlusal veneers, Journal of the Mechanical Behavior of Biomedical Materials 2021; 119: article no. 104485-article no. 104485 doi:10.1016/j.jmbbm.2021.104485
31. LI K, Tsoi JKH, Yiu CKY. The application of novel mussel-inspired compounds in dentistry, Dental Materials 2021; 37(4): 655-671 doi:10.1016/j.dental.2021.01.005
32. Savoldi F, Montalvao C, Hui L, Leung CKK, Jablonski NG, Tsoi JKH, Bornstein MM. The Human Bone Collection of the Faculty of Dentistry at the University of Hong Kong: History and description of cranial and postcranial skeletal remains, American Journal of Physical Anthropology 2021; 175(3): 718-730 doi:10.1002/ajpa.24273
33. LI K, Zhang Z, Sun Y, Yang H, Tsoi JKH, Huang C, Yiu CKY. In vitro evaluation of the anti-proteolytic and cross-linking effect of mussel-inspired monomer on the demineralized dentin matrix, Journal of Dentistry 2021; 111: article no. 103720-article no. 103720 doi:10.1016/j.jdent.2021.103720
34. Ye X, GU Y, Bai Y, Xia S, Zhang Y, Lou Y, Zhu Y, Dai Y, Tsoi JKH, Wang S. Does Low-Magnitude High-Frequency Vibration (LMHFV) Worth for Clinical Trial on Dental Implant? A Systematic Review and Meta-Analysis on Animal Studies, Frontiers in Bioengineering and Biotechnology 2021; 9: article no. 626892-article no. 626892 doi:10.3389/fbioe.2021.626892
35. Savoldi F, Yon M, Kwok V, Yeung WKA, Tanaka R, Tsoi KH, Matinlinna JP, Bornstein MM. Accuracy of CBCT in the Identification of Mental, Lingual, and Retromolar Foramina: A Comparison with Visual Inspection of Human Dry Mandibles, The International Journal of Periodontics & Restorative Dentistry 2021; 41: e277-e286 doi:10.11607/prd.4770
36. LI K, Yao CM, Sun YH, Wang KW, Wang XT, Wang ZZ, Tsoi KH, Huang C, Yiu CKY. Enhancing resin-dentin bond durability using a novel mussel-inspired monomer, Materials Today Bio 2021; 12: 100174-100174 doi:10.1016/j.mtbio.2021.100174
37. PAN Y, Tsoi KH, Lam YHW, Zhao K, Pow EHN. Improving intraoral implant scanning with a novel auxiliary device: An in‐vitro study, Clinical Oral Implants Research 2021; 32: 1466-1473 doi:10.1111/clr.13847
38. Tsoi KH, Ding H, Hon K, Leung MYY. The Spread of Droplets and Aerosols of Surgical Motor Handpiece Irrigation Using Different Suction Systems, Frontiers in Dental Medicine 2021; 2 doi:10.3389/fdmed.2021.727111
39. Savoldi F, Gou X, McGrath CP, Yang Y, Chow SC, Tsoi JKH, Gu M. Reliability of lateral cephalometric radiographs in the assessment of the upper airway in children: A retrospective study, The Angle Orthodontist 2020; 90(1): 47-55 doi:10.2319/022119-131.1
40. HAN A, DING H, Tsoi JKH, Imazato S, Matinlinna JP, Chen Z-F. Prolonged UV-C Irradiation is a Double-Edged Sword on the Zirconia Surface, ACS Omega 2020; 5(10): 5126-5133 doi:10.1021/acsomega.9b04123
41. Ng C, Tsoi JKH, Lo ECM, Matinlinna JP. Safety and Design Aspects of Powered Toothbrush—A Narrative Review, Dentistry Journal 2020; 8(1): article no. 15-article no. 15 doi:10.3390/dj8010015
42. Chen S, Tsoi JKH, Tsang PCS, Park Y-J, Song H-J, Matinlinna JP. Candida albicans aspects of binary titanium alloys for biomedical applications, Regenerative Biomaterials 2020; 7(2): 213-220 doi:10.1093/rb/rbz052
43. Zhang Y, Sun D, Cheng J, Tsoi KH, Chen J. Mechanical and biological properties of Ti–(0–25 wt%)Nb alloys for biomedical implants application, Regenerative Biomaterials 2020; 7: 119-127 doi:10.1093/rb/rbz042
44. Zhang M, Matinlinna JP, Tsoi JKH, Lin W, Cui X, Lu WW, Pan H. Recent developments in biomaterials for long-bone segmental defect reconstruction: A narrative overview, Journal of Orthopaedic Translation 2020; Epub 2019-10-08: 26-33 doi:10.1016/j.jot.2019.09.005
45. PAN Y, Tam JMY, Tsoi JKH, Lam WYH, Pow EHN. Reproducibility of laboratory scanning of multiple implants in complete edentulous arch: Effect of scan bodies, Journal of Dentistry 2020; 96: article no. 103329-article no. 103329 doi:10.1016/j.jdent.2020.103329
46. LI K, Sun Y, Tsoi JKH, Yiu CKY. The application of mussel-inspired molecule in dentin bonding, Journal of Dentistry 2020; 99: article no. 103404-article no. 103404 doi:10.1016/j.jdent.2020.103404
47. Han A, Tsoi JKH, Lung CYK, Matinlinna JP. An introduction of biological performance of zirconia with different surface characteristics: A review, Dental Materials Journal 2020; Epub 2020-06-06: article no. 2019-200 doi:10.4012/dmj.2019-200
48. Chan K, Leung HCM, Tsoi JKH. Predictive QSAR model confirms flavonoids in Chinese medicine can activate voltage-gated calcium (CaV) channel in osteogenesis, Chinese Medicine 2020; 15: article no. 31-article no. 31 doi:10.1186/s13020-020-00313-1
49. Albelasy EH, Hamama HH, Tsoi JKH, Mahmoud SH. Fracture resistance of CAD/CAM occlusal veneers: A systematic review of laboratory studies, Journal of the Mechanical Behavior of Biomedical Materials 2020; 110: article no. 103948-article no. 103948 doi:10.1016/j.jmbbm.2020.103948
50. PAN Y, Tam JMY, Tsoi JKH, Lam WYH, Huang R, Chen Z, Pow EHN. Evaluation of laboratory scanner accuracy by a novel calibration block for complete-arch implant rehabilitation, Journal of Dentistry 2020; 102: article no. 103476-article no. 103476 doi:10.1016/j.jdent.2020.103476
51. Li X, Tsui KH, Tsoi JKH, Green DW, Jin XZ, Deng YQ, Zhu YM, Li XG, Fan Z, Cheung GSP. A nanostructured anti-biofilm surface widens the efficacy against spindle-shaped and chain-forming rod-like bacteria, Nanoscale 2020; 12(36): 18864-18874 doi:10.1039/D0NR03809A
52. Tsoi KH, Pun SY. Diamine or diammine, British Dental Journal 2020; 229: 73-73 doi:10.1038/s41415-020-1942-7
53. BIJLE MN, Tsoi J, Ekambara M, Lo ECM, Carey CM, Yiu CKY. Enhanced Fluoride Bioavailability with Incorporation of Arginine in Child Dentifrices, Journal of Clinical Pediatric Dentistry 2020; 44(5): 332-341 doi:10.17796/1053-4625-44.5.7
54. CHEN Y, Yeung AWK, Pow EHN, Tsoi JKH. Current status and research trends of lithium disilicate in dentistry: A bibliometric analysis, Journal of Prosthetic Dentistry 2020; Epub 2020-09-30 doi:10.1016/j.prosdent.2020.08.012
55. BIJLE MN, Tsoi J, Ekambaram M, Lo ECM, Carey CM, Yiu CKY. Inter-method reliability for determining total and soluble fluorides in child low-fluoride formula dentifrices, Scientific Reports 2020; 10(1): article no. 20880-article no. 20880 doi:10.1038/s41598-020-77920-3
56. GUO Y, Matinlinna JP, Tsoi KH, Tang ATH. Residual Contaminations of Silicon-Based Glass, Alumina and Aluminum Grits on a Titanium Surface After Sandblasting, Silicon 2019; 11: 2313-2320 doi:10.1007/s12633-015-9287-6
57. JIN X, Tsoi KH, Matinlinna JP. A Novel Silane System for Amalgam Repair with Resin Composite: an in vitro Study, Silicon 2019; 11(5): 2321-2331 doi:10.1007/s12633-015-9292-9
58. Peng JY, Tsoi KH, Matinlinna JP, Botelho MG. Silver deposition on demineralized dentine surface dosed by silver diammine fluoride with different saliva, Journal of Investigative and Clinical Dentistry 2019; 10: e12382-e12382 doi:10.1111/jicd.12382
59. Qiao W, Lan X, Ma HX, Chan JYK, Lui VWY, Yeung KWK, Kwong DLW, Hu Z, Tsoi KH, Matinlinna JP, Su Y. Effects of salivary Mg on head and neck carcinoma via TRPM7, Journal of Dental Research 2019; 98(3): 304-312 doi:10.1177/0022034518813359
60. CHAN K, Tsoi JKH, Wu OK, Yon MJY, Wong RWK. Mechanical and biological evaluations of novel electrospun PLLA composite scaffolds doped with oxide ceramics, Journal of the Mechanical Behavior of Biomedical Materials 2019; 97: 229-237 doi:10.1016/j.jmbbm.2019.05.024
61. Savoldi F, Tsoi JKH, Paganelli C, Matinlinna JP. Sutural Morphology in the Craniofacial Skeleton: A Descriptive Microcomputed Tomography Study in a Swine Model, The Anatomical Record: advances in integrative anatomy and evolutionary biology 2019; 302(12): 2156-2163 doi:10.1002/ar.24230
62. Fokas G, Guo CY, Tsoi JKH. The effects of surface treatments on tensile bond strength of polyether-ketone-ketone (PEKK) to veneering resin, Journal of the Mechanical Behavior of Biomedical Materials 2019; 93: 1-8 doi:10.1016/j.jmbbm.2019.01.015
63. Abdalla MM, Lung CYK, Tsoi JKH, Matinlinna JP. Dental Resin-Zirconia Bonding Promotion Using High-Silica PVD Coating with High Ionization Sputtering Processing, Coatings 2019; 9(3): article no. 182-article no. 182 doi:10.3390/coatings9030182
64. YUN J, Wu J, Aparicio C, Tsoi JKH, Wang Y, Fok A. Enzyme-Mediated Mineralization of TiO2 Nanotubes Subjected to Different Heat Treatments, Crystal Growth & Design 2019; 19: 7112-7121 doi:10.1021/acs.cgd.9b00966
65. Savoldi F, Tsoi JKH, Paganelli C, Matinlinna JP. The biomechanical properties of human craniofacial sutures and relevant variables in sutural distraction osteogenesis: a critical review, Tissue Engineering Part B: Reviews 2018; 24(1): 25-36 doi:10.1089/ten.TEB.2017.0116
66. Matinlinna JP, Lung CYK, Tsoi JKH. Silane adhesion mechanism in dental applications and surface treatments: A review, Dental Materials 2018; 34(1): 13-28 doi:10.1016/j.dental.2017.09.002
67. Ho CMB, Ding H, Chen X, Tsoi KH, Botelho MG. The effects of dry and wet grinding on the strength of dental zirconia, Ceramics International 2018; 44: 10451-10462 doi:10.1016/j.ceramint.2018.03.062
68. Daood U, Tsoi KH, Neelakantan P, Matinlinna JP, Omar HAK, Al-Nabulsi M, Fawzy AS. In vitro assessment of ribose modified two-step etch-and-rinse dentine adhesive, Dental Materials 2018; 34: 1175-1187 doi:10.1016/j.dental.2018.05.005
69. Homaei E, Jin X, Pow EHN, Matinlinna JP, Tsoi KH, Farhangdoost K. Numerical fatigue analysis of premolars restored by CAD/CAM ceramic crowns, Dental Materials 2018; 34(7): e149-e157 doi:10.1016/j.dental.2018.03.017
70. Maghami E, Homaei E, Farhangdoost K, Pow EHN, Matinlinna JP, Tsoi KH. Effect of preparation design for all-ceramic restoration on maxillary premolar: A 3D finite element study, Journal of Prosthodontic Research 2018; 62(4): 436-442 doi:10.1016/j.jpor.2018.04.002
71. Savoldi F, Papoutsi A, Dianiskova S, Dalessandri D, Bonetti S, Tsoi KH, Matinlinna JP, Paganell C. Resistance to sliding in orthodontics: misconception or method error? A systematic review and a proposal of a test protocol, The Korean Journal of Orthodontics 2018; 48(4): 268-280 doi:10.4041/kjod.2018.48.4.268
72. Daood U, Omar H, Tsoi KH, Fawzy AS. Long-term bond strength to dentine of a chitosan-riboflavin modified two-step etch-and-rinse adhesives, International Journal of Adhesion and Adhesives 2018; 85: 263-273 doi:10.1016/j.ijadhadh.2018.06.015
73. Savoldi F, Xu B, Tsoi KH, Paganelli C, Matinlinna JP. Anatomical and mechanical properties of swine midpalatal suture in the premaxillary, maxillary, and palatine region, Scientific Reports 2018; 8: article no. 7073-article no. 7073 doi:10.1038/s41598-018-25402-y
74. HAN A, Tsoi KH, Matinlinna JP, Zhang Y, Chen Z. Effects of different sterilization methods on surface characteristics and biofilm formation on zirconia in vitro, Dental Materials 2018; 34: 272-281 doi:10.1016/j.dental.2017.11.012
75. Tsui KH, Li X, Tsoi KH, Leung SF, Lei T, Chan WY, Zhang C, Chen J, Cheung GSP, Fan Z. Low-cost, flexible, disinfectant-free and regular-array three-dimensional nanopyramid antibacterial films for clinical applications, Nanoscale 2018; 10: 10436-10442 doi:10.1039/C8NR01968A
76. Qiao W, Liu R, Li Z, Luo X, Huang B, Liu Q, Chen Z, Tsoi JKH, Su YX, Cheung KMC, Matinlinna JP, Yeung KWK, Chen Z. Contribution of the in situ release of endogenous cations from xenograft bone driven by fluoride incorporation toward enhanced bone regeneration, Biomaterials Science 2018; 6(11): 2951-2964 doi:10.1039/C8BM00910D
77. Ching PST, Savoldi F, Tsoi JKH, Gu M. Long-Term Effects of Rapid Maxillary Expansion on Upper Airway Structures, International Journal of Dentistry and Oral Science 2018; 2(special issue 1): 12-17 doi:10.19070/2377-8075-SI02-01003
78. Savoldi F, Tsoi JKH, Paganelli C, Matinlinna JP. Evaluation of rapid maxillary expansion through acoustic emission technique and relative soft tissue attenuation, Journal of the Mechanical Behavior of Biomedical Materials 2017; 65: 513-521 doi:10.1016/j.jmbbm.2016.09.016
79. Zhou CE, Kan CW, Matinlinna JP, Tsoi KH. Regenerable Antibacterial Cotton Fabric by Plasma Treatment with Dimethylhydantoin: Antibacterial Activity against S. aureus, Coatings 2017; 7(1): 11:1-14 doi:10.3390/coatings7010011
80. Savoldi F, Visconti L, Dalessandri D, Bonetti S, Tsoi JKH, Matinlinna JP, Paganelli C. In vitro evaluation of the influence of velocity on sliding resistance of stainless steel arch wires in a self-ligating orthodontic bracket, Orthodontics & Craniofacial Research 2017; 20(2): 119-125 doi:10.1111/ocr.12156
81. Tsai MM, Qiao W, Tsoi KH, Della Bona A, Matinlinna JP. Effect of cigarette smoking on the bond strength between resin cement and dental CAD/CAM ceramics, Journal of Adhesion Science and Technology 2017; 31(21): 2323-2334 doi:10.1080/01694243.2017.1299973
82. Zhao D, Tsoi KH, Wong HM, Chu CH, Matinlinna JP. Paediatric Over-the-Counter (OTC) Oral Liquids Can Soften and Erode Enamel, Dentistry Journal 2017; 5(2): article no. 17-article no. 17 doi:10.3390/dj5020017
83. Savoldi F, Tsoi JKH, Paganelli C, Matinlinna JP. Biomechanical behaviour of craniofacial sutures during distraction: An evaluation all over the entire craniofacial skeleton, Dental Materials 2017; 33(7): e290-e300 doi:10.1016/j.dental.2017.04.025
84. Wong ACH, Tian T, Tsoi KH, Burrow MF, Matinlinna JP. Aspects of adhesion tests on resin–glass ceramic bonding, Dental Materials 2017; 33: 1045-1055 doi:10.1016/j.dental.2017.06.013
85. Daood U, Banday N, Akram Z, Tsoi KH, Neelakantan P, Omar H, Abduljabbar T, Vohra F, A;-Hamoudi N, Fawzy AS. Mechanical and Spectroscopic Analysis of Retrieved/Failed Dental Implants, Coatings 2017; 7: 201-201 doi:10.3390/coatings7110201
86. HAN A, Tsoi KH, Matinlinna JP, Chen ZF. Influence of Grit-Blasting and Hydrofluoric Acid Etching Treatment on Surface Characteristics and Biofilm Formation on Zirconia, Coatings 2017; 7: 130-130 doi:10.3390/coatings7080130
87. Liu X, CHEN S, Tsoi KH, Matinlinna JP. Binary titanium alloys as dental implant materials—a review, Regenerative Biomaterials 2017; 4: 315-323 doi:10.1093/rb/rbx027
88. Homaei E, Farhangdoost K, Tsoi KH, Matinlinna JP, Pow EHN. Static and fatigue mechanical behavior of three dental CAD/CAM ceramics, Journal of the Mechanical Behavior of Biomedical Materials 2016; 59: 304-313 doi:10.1016/j.jmbbm.2016.01.023
89. WANG T, Tsoi KH, Matinlinna JP. A novel zirconia fibre-reinforced resin composite for dental use, Journal of the Mechanical Behavior of Biomedical Materials 2016; 53: 151-160 doi:10.1016/j.jmbbm.2015.08.018
90. Zhou CE, Kan CW, Yuen CWM, Matinlinna JP, Tsoi KH, Zhang Q. Plasma treatment applied in the pad-dry-cure process for making rechargeable antimicrobial cotton fabric that inhibits S. Aureus, Textile Research Journal 2016; 86(20): 2202-2215 doi:10.1177/0040517515622147
91. HAN A, Li X, Huang B, Tsoi KH, Matinlinna JP, Chen ZF, Deng DM. The effect of titanium implant surface modification on the dynamic process of initial microbial adhesion and biofilm formation, International Journal of Adhesion and Adhesives 2016; 69: 125-132 doi:10.1016/j.ijadhadh.2016.03.018
92. HAN A, Tsoi KH, Rodrigues FP, Leprince JG, Palin WM. Bacterial adhesion mechanisms on dental implant surfaces and the influencing factors, International Journal of Adhesion and Adhesives 2016; 69: 58-71 doi:10.1016/j.ijadhadh.2016.03.022
93. Mustafa A, Tsoi KH, Matinlinna JP. Aspects of enamel bonding using experimental silanes for orthodontic adhesion, International Journal of Adhesion and Adhesives 2016; 70: 137-141 doi:10.1016/j.ijadhadh.2016.06.006
94. Wang AS, Botelho MG, Tsoi KH, Matinlinna JP. Effects of silver diammine fluoride on microtensile bond strength of GIC to dentine, International Journal of Adhesion and Adhesives 2016; 70: 196-203 doi:10.1016/j.ijadhadh.2016.06.011
95. Homaei E, Farhangdoost K, Pow EHN, Matinlinna JP, Akbari M, Tsoi KH. Fatigue resistance of monolithic CAD/CAM ceramic crowns on human premolars, Ceramics International 2016; 42(14): 15709-15717 doi:10.1016/j.ceramint.2016.07.029
96. Zakir M, Ashraf U, Tian T, Han A, Qiao W, Jin X, Zhang M, Tsoi JKH, Matinlinna JP. The Role of Silane Coupling Agents and Universal Primers in Durable Adhesion to Dental Restorative Materials - a Review, Current Oral Health Reports 2016; 3(3): 244-253 doi:10.1007/s40496-016-0108-9
97. JIN X, Homaei E, Matinlinna JP, Tsoi KH. A new concept and finite-element study on dental bond strength tests, Dental Materials 2016; 32: e238-e250 doi:10.1016/j.dental.2016.07.005
98. Villard NM, Seneviratne CJ, Tsoi KH, Heinonen M, Matinlinna JP. Candida albicans aspects of novel silane system–coated titanium and zirconia implant surfaces, Clinical Oral Implants Research 2015; doi:10.1111/clr.12338
99. LIU D, Tsoi KH, Matinlinna JP, Wong HM. Effects of some chemical surface modifications on resin zirconia adhesion, Journal of the Mechanical Behavior of Biomedical Materials 2015; 46: 23-30 doi:10.1016/j.jmbbm.2015.02.015
100. Gao S, Tsoi JKH, Cheung GSP, Matinlinna J. An in vitro Evaluation on a Novel Root Canal Cleansing Method by Using Nylon Fibers, Fibers 2015; 3(3): 197-205 doi:10.3390/fib3030197
101. Ho BJ, Tsoi KH, LIU D, Lung YK, Wong HM, Matinlinna JP. Effects of sandblasting distance and angles on resin cement bonding to zirconia and titanium, International Journal of Adhesion and Adhesives 2015; 62: 25-31 doi:10.1016/j.ijadhadh.2015.06.009
102. LIU D, Tsoi KH, Pow EHN, Wong HM. Influence of different etching protocols on the reliability of resin bonding to CAD/CAM feldspathic porcelain, International Journal of Adhesion and Adhesives 2015; 62: 18-24 doi:10.1016/j.ijadhadh.2015.06.007
103. Leung BTW, Tsoi KH, Matinlinna JP, Pow EHN. Comparison of mechanical properties of three machinable ceramics with an experimental fluorophlogopite glass ceramic, The Journal of Prosthetic Dentistry 2015; 114(3): 440-446 doi:10.1016/j.prosdent.2015.02.024
104. Wong JDC, Lung YK, Tsoi KH, Matinlinna JP. Effects of a zirconate coupling agent incorporated into an experimental resin composite on its compressive strength and bonding to zirconia, Journal of the Mechanical Behavior of Biomedical Materials 2014; 29: 171-176 doi:10.1016/j.jmbbm.2013.09.007
105. Cheng HCK, Tsoi KH, Zwahlen RA, Matinlinna JP. Effects of silica-coating and a zirconate coupling agent on shear bond strength of flowable resin-zirconia bonding, International Journal of Adhesion and Adhesives 2014; 50: 11-16 doi:10.1016/j.ijadhadh.2013.12.025
106. Guo Y, Tang ATH, Tsoi KH, Matinlinna JP. Effects of different blasting materials on charge generation and decay on titanium surface after sandblasting, Journal of the Mechanical Behavior of Biomedical Materials 2014; 32: 145-154 doi:10.1016/j.jmbbm.2013.12.026
107. Liu D, Pow EHN, Tsoi KH, Matinlinna JP. Evaluation of four surface coating treatments for resin to zirconia bonding, Journal of the Mechanical Behavior of Biomedical Materials 2014; 32: 300-309 doi:10.1016/j.jmbbm.2013.12.011
108. TIAN T, Tsoi KH, Matinlinna JP, Burrow MF. Aspects of bonding between resin luting cements and glass ceramic materials, Dental Materials 2014; 30: e147–e162-e147–e162 doi:10.1016/j.dental.2014.01.017
109. TIAN T, Tsoi KH, Matinlinna JP, Burrow MF. Evaluation of microtensile bond strength on ceramic-resin adhesion using two specimen testing substrates, International Journal of Adhesion and Adhesives 2014; 54: 165-171 doi:10.1016/j.ijadhadh.2014.06.003
110. Tan CM, Tsoi KH, Seneviratne CJ, Matinlinna JP. Evaluation of the Candida albicans removal and mechanical properties of denture acrylics cleaned by a low-cost powered toothbrush, Journal of Prosthodontic Research 2014; doi:10.1016/j.jpor.2014.06.002
111. EPASINGHE DJ, Yiu CKY, Burrow MF, Tsoi KH, Tay FRCM. Effect of flavonoids on the mechanical properties of demineralised dentine, Journal of Dentistry 2014; 42: 1178-1184 doi:10.1016/j.jdent.2014.07.002
112. Zakir M, Tsoi KH, Chu CH, Lung CYK, Matinlinna JP. Bonding dissimilar materials in dentistry : a critical review, Reviews of Adhesion and Adhesives 2014; 2(4): 413-432 doi:10.7569/RAA.2014.097309
113. Matinlinna JP, Tsoi JKH, de Vries J, Busscher HJ. Characterization of novel silane coatings on titanium implant surfaces, Clinical Oral Implants Research 2013; doi:10.1111/j.1600-0501.2012.02504.x
114. Matinlinna JP, Choi AH, Tsoi JKH. Bonding promotion of resin composite to silica-coated zirconia implant surface using a novel silane system, Clinical Oral Implants Research 2013; 290-296 doi:10.1111/j.1600-0501.2012.02525.x
115. Liu D, Matinlinna JP, Tsoi KH, Pow EHN, Miyazaki T, Shibata Y, Kan CW. A new modified laser pretreatment for porcelain zirconia bonding, Dental Materials 2013; 29(5): 559-565 doi:10.1016/j.dental.2013.03.002
116. Zhu J, Tang ATH, Matinlinna JP, Tsoi KH, Hagg EUO. Potentiometric Determination of Fluoride Release from Three Types of Tea Leaves, International Journal of Electrochemical Science 2013; 8(9): 11142-11150
117. So YC, Tsoi JKH, Matinlinna JP. A new approach to cure and reinforce cold-cured acrylics, Silicon 2012; 4(3): 209-220 doi:10.1007/s12633-012-9124-0
118. Tsoi KH. Letters : Mercury in the mix, Chemistry World 2010; 7: 40-40

1. YUN J, Tsui KH, Fan Z, Burrow MF, Matinlinna JP, Wang Y, Fok A, Tsoi KH. Biomimetic Approach to Evaluate Mineralization of BAG-Containing Resin Composite, Dental Materials 2022; 38: e43-e43 doi:10.1016/j.dental.2021.12.101
2. CHEN Y, Pow EHN, Tsoi KH. Morphological and Functional Evaluation of Biogeneric and Human CAD-Designed Crowns, Dental Materials 2022; 38: e9-e10 doi:10.1016/j.dental.2021.12.046
3. BAI X, CHEN Y, Tsoi KH. Water Sorption And Color Change Of Four Injectable Composite Resins, IADR/APR 2022 2022;
4. CHEN Y, BAI X, Tsoi KH. Flexural and Wear Properties of Injectable Resin Composites, IADR-APR 2022 2022;
5. DING H, CHEN Y, Burrow MF, Tsoi KH. Dental Crown Design Using Artificial Intelligence (AI): Is It Feasible?, IADR/APR 2022 2022;
6. Mahmoudi Meimand N, Burrow MF, Tsoi KH, Cho K. Experimental investigation on fluorinated UDMA as a BPA free dental resin composite, 2022;
7. Chen Y, Pow EHN, Tsoi KH. Learning Curve Exists in CAD, But Does it Matter?, 2021 CED-IADR/NOF Oral Health Research Congress 2021;
8. YUN J, Tsui KH, Fan Z, Burrow MF, Matinlinna JP, Wang Y, Fok A, Tsoi KH. Biomimetic Approach to Evaluate Mineralization of BAG-Containing Resin Composite, 2021 Academy of Dental Materials (ADM) Annual Meeting 2021;
9. Tsoi KH. Surface Chemistries of Self-assembled Dental Silanes Monolayers, Journal of Dental Research (Spec Issue) 2021; 100(Spec Iss A): Final Presentation ID: 1484-Final Presentation ID: 1484
10. Li K, Tsoi KH, Yiu CKY. Inhibition of Proteases by Mussel-Inspired Monomer, Journal of Dental Research (Spec Issue) 2021; 100(Spec Iss A): Final Presentation ID: 0565-Final Presentation ID: 0565
11. CHEN Y, Pow EHN, Tsoi KH. Morphological and Functional Evaluation of Biogeneric and Human CAD-Designed Crown, 2021 Academy of Dental Materials (ADM) Annual Meeting 2021;
12. Tsoi KH. Bacterial adhesion on dental ceramics, SDMS-CSA & ADM Joint Hybrid Meeting: Forum on Advanced Dental and Biomaterials 2021;
13. Tsoi KH, Pan Z. Nanodiamond-coated milling bits enhance glossiness of zirconia after sintering, IADR SEA 2021, Hong Kong 2021;
14. Tsoi KH, Yang Y, DING H, Matinlinna JP. Biodegradation of zirconia by Fusobacterium nucleatum, British Society for Oral and Dental Research Annual Meeting 2021, Birmingham 2021;
15. Tsoi KH, Lau BCK, Ding H, Matinlinna JP. Toothbrush with fluoride-infused bristles: A potential tool to remineralize enamel., IADR/AADR/CADR 2020 General Session & Exhibition, Washington DC, USA 2020;
16. Yon JY, Matinlinna JP, Tsoi KH, Vallittu P, Lassila L. Effect of silanes on mechanical properties of alkali-resistant glass FRC, IADR/AADR/CADR General Session & Exhibition, Washington DC, USA 2020; Final Presentation ID: 0184-Final Presentation ID: 0184
17. Tsoi KH. Out-of-classroom learning for HKU dental students - International Capstone Experience., International Collaborative Symposium on Development of Human Resources in Practical Oral Health and Treatment, Bali, Indonesia 2020;
18. Tsoi KH. Artificial Intelligence in Dentistry: Now and Future, Asia Pacific and Dental Students Association (APDSA) webinar series 2020;
19. Tsoi KH. Some AI technologies in dental design, The 4th International Workshop on Advanced Ceramics and Technologies for Dentistry (ACT4D 2020) 2020;
20. Pan Y, Tsoi KH, Pow EHN. Digital evaluation of the accuracy of implant scanbody, IADR/PER 96th General Session & Exhibition 2019; 98(Spec ISS A)
21. Tsoi KH, Yang JY, Han A, Matinlinna JP. The Effect Of Bacteria Adhesion On Zirconia Stability, 25th European Dental Materials Conference (EDMC), 2019 2019;
22. Tsoi KH, Zhao D, Matinlinna JP, Wong HM. Traditional Chinese Granule Medications are Safe for Decidious Teeth, Journal of Dental Research (Spec Issue) 2019; 98(Spec Iss A): article ID: 2127-article ID: 2127
23. Ding H, Li X, Tsui KH, Fan Z, Cheung GSP, Matinlinna JP, Tsoi KH. Initial Bacterial Adhesion Counting on Nanopyramid-Structured Surfaces Using Artificial-Intelligence Technique, Journal of Dental Research (Spec Issue) 2019; 98(Spec Iss A): Final Presentation ID: 1404-Final Presentation ID: 1404
24. Ashraf U, Tsoi KH, He J, Shah A, Khan A, Pow EHN, Matinlinna JP. Effect of novel FUDMA-TEGDMA-BAG resin on dentine adhesion, Journal of Dental Research (Spec Issue) 2019; 98(Spec Iss A): Presentation ID: 1094-Presentation ID: 1094
25. Yon JY, Matinlinna JP, Tsoi KH, Vallittu P, Lassila L. Effect of Long-Chain Silane on Mechanical Properties of Experimental Resin-Composite, Journal of Dental Research (Spec Issue) 2019; 98(Spec Iss A): Presentation ID: 1093-Presentation ID: 1093
26. Tsoi KH. AI evaluation of initial bacterial adhesion on zirconia, International Symposium for Interface Oral Health Science 2019 2019;
27. Tsoi KH. CAD/CAM Ceramics in Dentistry, Invited lecture, Shenzhen University General Hospital 2019;
28. Matinlinna JP, ZAKIR M, Kukk E, Chu CH, Tsoi KH, Laiho T, Granroth S. Comparison of Conventional and Novel Dual-surface Pretreatment-method for Titanium, IADR/PER 96th General Session & Exhibition 2018; 97(Special Iss B): no. 2780-no. 2780
29. Yon MJY, Lam YHW, Tsoi KH. Do Economic and Dental Resources Affect Older Persons’ OHRQoL?, IADR/PER 96th General Session & Exhibition 2018; 97(Spec Iss B): no. 3003-no. 3003
30. Qiao W, Ln X, Yeung KWK, Tsoi KH, Matinlinna JP, Su Y. Salivary Mg Promotes the Progression of Head and Neck Cancer Via TRPM7, IADR/PER 96th General Session & Exhibition 2018; 97(Spec Iss B): no. 3552-no. 3552
31. Tsoi KH, Yip V, Ng CYJ. Strength of Integrated Dental-floss and Handles in Hong Kong, IADR/PER 96th General Session & Exhibition 2018; 97(Spec Iss B): no. 2970-no. 2970
32. Tsoi KH. Teaching philosophy of HKU and PBL in dental education, 1st Beijing-Tianjin-Hebei (Jingjinji Metropolitan Region) Dental Skills Competition, Tianjin 2018;
33. Tsoi KH. Dental Implant Materials, HKU-SYSU Joint Forum on Dental and Implant Materials Science 2018;
34. Tsoi KH. Dental CAD/CAM Materials: approaches, opportunities and messages, Interface Oral Health Science Summer Seminar 2017, Tohoku University, Guest lecture 2018;
35. Tsoi KH. Antibacterial dental materials: mechanism and future, Invited guest lecture, Wonkwang University, College of Dentistry, Iksan, Korea 2018;
36. Han A, Tsoi KH, Matinlinna JP, Chen Z. UV-A and UV-C Irradiation Effects on Zirconia Surface, IADR-SEA (International Association for Dental Research (Southeast Asian Division)) Annual Scientific Meeting, Da Nang, Vietnam, 2018 2018;
37. Tsoi KH. Computer simulation in dental research and dentistry, Biomaterials and Novel Technologies for Healthcare 2nd Biennial International Conference BioMaH 2018; 108-108
38. Tsoi KH, Ding H, Yang JY, Matinlinna JP. Evaluation of Initial Bacterial Adhesion on Zirconia using Artificial-Intelligence (AI), Dental Materials 2018; 34(Suppl. 1): e122-e122 doi:10.1016/j.dental.2018.08.255
39. Tsoi KH, Daood U, Seow LL, Omer H, Smales F. Teaching is Learning Twice; Peer Assisted Leaning in Dental Education, IADR/PER 96th General Session & Exhibition, 2018 2018;
40. Tsoi KH. Digital Dentistry is Here to Stay, IADR/PER 96th General Session & Exhibition, 2018 2018;
41. Tsoi KH. Digital Materials in Dentistry, Dental Science Symposium, Fujian Medical University School and Hospital of Stomatology 2018;
42. Ashraf U, Tsoi KH, Pow EHN, Matinlinna JP. Dentine bond strength of fluoride-containing dental adhesives: a systematic review, Journal of Dental Research (Spec Issue) 2017; 96(Spec Iss A): abstract no. 775-abstract no. 775
43. Pu J, Lan X, Su Y, Pang S, Kwok VYT, Tsoi JKH, Qiao W, Chan J, Kwong DLW. Saliva Electrolyte Analysis Using ICP-OES in NPC Patients Following IMRT, Journal of Dental Research (Spec Issue) 2017; 96(Spec Iss A): no. 1638-no. 1638
44. Tsoi KH, Liu YH, Cheng YY, Matinlinna JP. Mechanical Aspects of Wollastonite Microfibre-reinforced Resin Composites, IADR/AADR/CADR 2017 General Session & Exhibition 2017;
45. Yon MJY, Hadis M, Tsoi KH, Palin WM. The Effects of Photoinitiator Chemistry on Light Absorption and Conversion, IADR/AADR/CADR 2017 General Session & Exhibition 2017; abstract no. 3808-abstract no. 3808
46. Qiao W, Tsoi KH, Chen Z, Yeung KWK, Matinlinna JP, Darvell BW. Solubility of Hydroxyapatite by Large-angle Scattering-based Solid Titration, IADR/AADR/CADR 2017 General Session & Exhibition 2017; abstract no. 3784-abstract no. 3784
47. Zakir M, Kukk E, Granroth S, Laiho T, Chu CH, Tsoi KH, Matinlinna JP. New physico-chemical approaches on titanium surfaces: characterization and topography, IADR/AADR/CADR 2017 General Session & Exhibition 2017;
48. Tsoi KH, Ding H, Matinlinna JP. Recycling Dental Zirconia Wastes: Is It Feasible?, Journal of Dental Research (Spec Issue) 2017; 96(Spec Issue B): abstract no. 0244-abstract no. 0244
49. Savoldi F, Xu B, Tsoi KH, Paganelli C, Matinlinna JP. Anatomical and mechanical properties of the midpalatal suture, Journal of Dental Research (Spec Issue) 2017; 96(Spec Iss B)
50. Tsoi KH, Wang AS, Matinlinna JP. Antimicrobial and mechanical properties of experimental TCM-loaded dental resin, Journal of Dental Research (Spec Issue) 2017; 96(Spec Iss B)
51. Yon MJY, Tsoi KH. Economic Inequalities in Elderly Oral Health-Related Quality of Life: A Pilot Study, Journal of Dental Research (Spec Issue) 2017; 96(Spec Iss B)
52. Tsoi KH, Ding H. Teaching and Learning mode in HKU Dental Materials Science, 12th Annual Dental Materials Conference cum 5th Chinese Stomatological Association (CSA) Dental Materials sub-committee meeting, Tianjin 2017;
53. Tsoi KH. Advances in Dental Materials, Zhengzhou University, Guest lecture 2017;
54. Tsoi KH. Fatigue in Dental CAD/CAM Ceramics, Kaohsiung Medical University, Guest Lecture 2017;
55. Tsoi KH. Dental CAD/CAM Ceramics, Wenzhou Medical University, Invited lecture for postgraduate 2017;
56. Tsoi KH. Bonding to Zirconia, Annual meeting of Fujian Prosthodontic Society, 2017 2017;
57. Tsoi KH. How to Identify Fake and Falsified Data, Guest lecture, Universiti Kebangsaan Malaysia, Kuala Lumpur, Malaysia 2017;
58. Qiao W, LAN X, Ma H, Chan JYK, Lui VWY, Yeung KWK, Kwong DLW, Tsoi KH, Matinlinna JP, Su Y. Salivary magnesium level is correlated with progression of head and neck squamous cell carcinoma via the activation of TRPM7 channel, National conference on salivary gland diseases, Nanjing, 2017 2017;
59. Choi T, Camilleri J, Tsoi JKH, Matinlinna J. Radiopacity and material interaction with dentine of selected dental materials, General Session of the International Association for Dental Research, IADR 2016 2016;
60. Han A, Tsoi JKH, Chen Z, Matinlinna J. Aesthetic outcomes of zirconia surface using different sterilization methods, General Session of the International Association for Dental Research, IADR 2016 2016;
61. Tian T, Burrow MF, Tsoi KH, Matinlinna J. Long-term evaluation of bond strength of CAD/CAM ceramics to resin cement, General Session of the International Association for Dental Research, IADR 2016 2016;
62. Tsoi JKH, Chan K, Yang Y. Effects of bone formation by flavonoids: an in silico study, General Session of the International Association for Dental Research, IADR 2016 2016;
63. Qiao W, Matinlinna JP, Tsoi JKH, Chen Z. Fluoride and carbonate co-incorporated porcine bone derived biological apatite stimulates osteogenesis in vitro via WNT/beta-catenin pathway, World Biomaterials Congress, WBC 2016 2016; doi:10.3389/conf.FBIOE.2016.01.01150
64. Yon MJY, Tsoi KH, Lam YH. Do elderly from developed countries have better oral health-related quality of life? An analysis in 15 countries, U21 Undergraduate Research Conference, URC 2016 2016;
65. Yon MJY, Tsoi KH, Matinlinna JP. Aspects of Silicon Release from Resin Composites and Glass Ionomer Cement, International Dental Materials Congress 2016 2016; 54-54
66. Tsoi JKH, Homaei E, Matinlinna JP. Fatigue resistance of CAD/CAM crowns restored on premolars, International Dental Materials Congress 2016 2016; 64-64
67. Tsoi KH. Safe materials, safe tests!, 5th International Symposium on Biomedical Materials, Lahore, Pakistan 2016;
68. Tse F, Wong J, Lo T, LAN X, Qiao W, Chan J, Tsoi KH, Kwong D, Su Y. Use of University of Michigan Xerostomia-Related Quality of Life Scale for Nasopharyngeal Carcinoma patients before and after radiation: a pilot study, 38th Asia Pacific Dental Congress (APDC) 2016 2016;
69. Pang SL, Kwok V, Pu J, LAN X, Qiao W, Chan J, Tsoi KH, Kwong D, Su Y. Use of inductively coupled plasma-atomic emission spectrophotometry for saliva analysis in nasopharyngeal carcinoma patients before and after radiation, 38th Asia Pacific Dental Congress (APDC) 2016 2016;
70. Tsoi JKH, Cheong CHL, Wong RWK, McGrath C, King N. Antimicrobial performance of five Hong Kong OTC chlorhexidine-based mouthrinse, Journal of Dental Research Meeting Abstracts 2015; 94(Spec. Iss. A)
71. Wang T, Leung TW, Pow EHN, Tsoi KH, Matinlinna JP. Mechanical properties of an experimental fluorophlogopite glass ceramic, IADR/AADR/CADR General Session and Exhibition 2015 2015;
72. Jin X, Tsoi KH, Matinlinna JP. Adhesion of resin to Ag-Pd alloy using a novel silane system, IADR/AADR/CADR General Session and Exhibition 2015 2015;
73. Tsoi KH, Ho BJ, Liu D, Lung YK, Wong HM, Matinlinna JP. What is the optimal angle and distance to grit-blast zirconia, IADR-SEAADE 2015 2015;
74. Cheung HC, Ng MY, Savoldi F, Matinlinna JP, Tsoi KH. Mechanical aspects of Camphorquinone-amine filler coating in dental resin composites, IADR-SEAADE 2015 2015;
75. Wu OK, Tsoi JKH, Chan K, Yon MJY. Comparison of mechanical properties in four 3D printable scaffold-biocomposites, IADR-SEAADE 2015 2015;
76. Chen S, Tsoi KH, Matinlinna JP. Silane effects of peri-implantitis on titanium implant surfaces, IADR-SEAADE 2015 2015;
77. Ng MY, Cheung HC, Savoldi F, Matinlinna JP, Tsoi KH. Does camphorquinone enantiomers matter in mechanical properties of resin composites?, IADR-SEAADE 2015 2015;
78. Dian M, Tsoi KH, Matinlinna JP. Aspects of light transmission and depth of cure of novel bioactive glass-filled resin composites, Hong Kong International Dental Expo And Symposium, HKIDEAS 2015 2015;
79. Tsoi KH. Computer modelling in dental materials research, HKU-NDU-SU Dentistry Symposium: Emerging Topics in Dentistry, Faculty of Dentistry, University of Hong Kong 2015;
80. Tsoi KH, Homaei E, Pow EHN, Matinlinna JP. The reliability and fatigue behaviour of three dental CAD/CAM ceramics, European Dental Materials Conference, EDMC 2015 2015;
81. Yon MJY, Tsoi KH, Matinlinna JP. Aspects of silicon, silver and sodium release from dental restorative materials, European Dental Materials Conference, EDMC 2015 2015;
82. Tsoi KH. Active dental learning via Facebook: interaction aspect in and out of the PBL classroom, Annual Meeting of the Association for Dental Education in Europe, ADEE 2015 2015;
83. Zhu J, Tsoi KH, Tang ATH, Hagg EUO, Matinlinna JP. Etch-and-rinse versus Self-etch Pretreatment: the Ultra-structural Investigation on Intact Enamel, Journal of Dental Research 2014; 93(Special issue B: abstract no. 1394)
84. Matinlinna JP, Lung YK, Liu D, Tsoi KH. Characterization of nano-silica coating of zirconia for resin-zirconia bonding, Journal of Dental Research 2014; 93(Special issue B: abstract no. 204)
85. Tian T, Burrow MF, Tsoi KH, Matinlinna JP. Weibull analysis of ceramic-resin bonding using two specimen testing substrates, Journal of Dental Research 2014; 93(Special issue B: abstract no. 302)
86. Tsoi KH, Ho BJ, Lung YK, Matinlinna JP. Sandblasting at 90o angle – optimal for resin-titanium bonding?, Journal of Dental Research 2014; 93(Specila issue B: abstract no. 322)
87. Wong H, Liu D, Tsoi J. Influence of different etching time on microhardness of dental porcelain, World Congress on Advances in Civil, Environmental and Materials Research (ACEM’14) 2014;
88. Tsoi KH, Cheong CHL, Wong RWK, McGrath CPJ, King NM. Digluconate or dihydrochloride: which chlorhexidine salt is better for oral-microbicidy?, Journal of Dental Research 2014; 93(Sp Iss C)
89. Tsoi JKH, Matinlinna JP. Effects of collaborative learning by using Facebook blended with PBL: a pilot study, SEAADE Annual Scientific Meeting 2014;
90. Lung CYK, Liu D, Tsoi KH, Matinlinna JP. Adhesion promotion of resin to zirconia by silicon nitride hydrolysis, Dental Materials 2014; 30(suppl. 1): e15, abstract no. 29-e15, abstract no. 29 doi:10.1016/j.dental.2014.08.030
91. Wang S, Botelho MG, Tsoi KH, Matinlinna JP. Effects of silver diammine fluoride on GIC dentin bonding, Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, ASFRCMD 2014 2014;
92. Tsoi JKH, Chan K, Wong RWK. In vitro evaluation of novel electrospun oxide-scaffold biocomposites, IADR/PER Congress 2014;
93. Chen S, Tsoi KH, Matinlinna JP. The Mechanical Properties of Resin Cements Modified with Two Traditional Chinese Medicine (TCM), The 2nd Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, ASFRCMD 2014;
94. Tsoi KH, CHAN K, Wong RWK. Development and characterization of 3D printable fibrous PLLA biocomposites, Asian Symposium on Fibre Reinforced Composite Materials in Dentistry 2014;
95. Tsoi KH. It's a small world after all - Silane coating for dental implant adhesion, Global Conference on Biomedical Engineering 2014;
96. Tan CM, Tsoi KH, Seneviratne CJ, Matinlinna JP. Effects of Denture Cleaning by Low-cost Electric Toothbrush, IADR archives 2013;
97. PENG JJ, Botelho MG, Tsoi KH, Matinlinna JP. Quantitative Study of Topical SDF Application at Various Concentrations, IADR archives 2013;
98. Tian T, Burrow MF, Tsoi KH, Matinlinna JP. Evaluation of Ceramic-resin Bonding Using Two Specimen Bonding Substrates, The 2nd Meeting of the International Association of Dental Research - Asia Pacific Region (IADR-APR 2013 2013;
99. Wong JDC, Tsoi JKH, Lung CYK, Matinlinna JP. Adhesion aspect of incorporating zirconate coupling agent in resin composites, CED-IADR Florence 2013 2013;
100. Guo Y, Matinlinna JP, Tang TH, Tsoi JKH. Effects of different blasting materials on charge generation on titanium, CED-IADR Florence 2013 2013;
101. Liu D, Matinlinna JP, Pow EHN, Tsoi JKH. Comparison of three coating methods for resin zirconia bonding, CED-IADR Florence 2013 2013;
102. Tsoi KH, Matinlinna JP. Effects of combined journal-based and e-learning for Dental Materials Science postgraduate teaching, 24th SEAADE Meeting 2013 2013;
103. Lung CYK, Heinonen M, Tsoi JKH, Matinlinna JP. Characterization of a new polysiloxane-based titanium surface treatment for resin titanium bonding, Dental Materials 2013; 29(suppl. 1): e17, abstract no. 36-e17, abstract no. 36 doi:10.1016/j.dental.2013.08.037
104. Lung YK, Liu D, Tsoi KH, Matinlinna JP. Surface modification of titanium by a polysiloxane coating on resin titanium bonding, 3rd HKIDEAS 2013 2013;
105. Peng J, Botelho MG, Matinlinna JP, Tsoi KH. Quantitative EDX analysis of silver compounds on dentine in saliva, 22nd European Dental Materials Conference 2013 2013;
106. Epasinghe DJ, Yiu CKY, Burrow MF, Tsoi KH. Effect of flavonoids on biomodification of demineralized dentine, HKU Faculty of Dentistry 2013 Annual Scientific Meeting 2013;
107. Matinlinna JP, Tsoi JKH, Lung CYK, Cheng HCK. Resin-Zirconia bonding promotion in vitro with a zirconate coupling agent, IADR/AADR/CADR Seattle 2013 2013;
108. Peng JJ, Botelho MG, Matinlinna JP, Tsoi KH. Ion chromatography for saliva analysis, Sun Yat-Sen University & The University of Hong Kong Joint Dental Materials Symposium 2013;
109. Guo Y, Tang ATH, Tsoi KH, Matinlinna JP. Roughening and contamination effects of different sanblasting grits for titanium surface treatment, Trilateral Dental Symposium on Dental Virtual Education Today 2013;
110. Guo Y, Matinlinna JP, Tang ATH, Tsoi KH. Effects of different blasting materials on charge generation on titanium, Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, ASFRCMD 2013 2013;
111. Tian T, Burrow MF, Tsoi KH, Matinlinna JP. Microtensile bond strength between ceramic and resin using two specimen bonding substrates, Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, ASFRCMD 2013 2013;
112. Lung CYK, Heinonen M, Kukk E, Tsoi KH. AFM and XPS analysis of polysiloxane-based titanium surface with a thermal treatment, Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, ASFRCMD 2013 2013;
113. Matinlinna JP, Tsoi JKH. Novel organofunctional silane coatings on silica-coated Ti, Nanotechnology 2012: Bio Sensors, Instruments, Medical, Environment and Energy 2012; 122-125
114. Liu D, Matinlinna JP, Pow EHN, Tsoi JKH, Miyazaki T, Shibata Y. A modified laser pretreatment of zirconia for bonding with porcelain, PER/IADR Congress, 2012 2012;
115. So YC, Tsoi JKH, Matinlinna JP. Effects of cold-cured PMMA reinforcement by E-glass fibers impregnation, PER/IADR Congress, 2012 2012;
116. Liu D, Matinlinna JP, Pow EHN, Tsoi KH, Miyazaki T, Shibata Y. A noval porcelain zirconia bonding approach using laser, The 1st Trilateral Zirconia & Titanium Today Dental Materials Science Symposium, Hong Kong, 31 October 2012: Program Booklet 2012; 19-19
117. Tsoi KH, Matinlinna JP. App-based teaching in dental materials science laboratory classes: a case report, South East Asia Association for Dental Education (SEAADE) Annual Scientific Meeting 2012;
118. Jin X, Tsoi KH, Matinlinna JP. Novel Primers for Dental amalgam Repair, Annual Scientific Meeting of the International Association for Dental Research South-East Asia Division (IADR-SEA 2012) 2012;
119. Tsoi KH. Novel nano-polymeric coatings for implant materials, NanoMedicine 2012 2012;

1. Matinlinna JP, Tsoi KH, Tian T(Eds.). Program Booklet of The 4th Trilateral HKU-NDU-SU Dentistry Symposium 2015 'Emerging Topics in Dentistry'. Hong Kong: Dental Materials Science, Faculty of Dentistry, The University of Hong Kong; 2015.
2. Tsoi KH, Hong G(Eds.). HKU-Tohoku University 1st Bilateral Dental Symposium : advanced prosthodontics and biomaterials science: Program Booklet. Hong Kong: Dental Materials Science, Faculty of Dentistry, University of Hong Kong ; Graduate School of Dentistry, Tohoku University; 2015.
3. Fok WWT, Wong IHM, Au Yeung EHH, Merchant T, Chan CKY, Tsoi JKH, Lam JCK, Lo HYH, Lei M, Tam VWL. The New Era of e-Learning Volume II - Interactive Learning and Assessment for Learning. Hong Kong: Department of Electrical and Electronic Engineering, Faculty of Engineering, The University of Hong Kong; 2014.
4. Matinlinna JP, Tsoi KH(Eds.). Programme Booklet of the 1st Asian Symposium on Fibre Reinforced Composite Materials in Dentistry (ASFRCMD). Hong Kong: Dental Materials Science, Faculty of Dentistry, The University of Hong Kong; 2013.

1. Tsoi KH. Ceramic materials in dentistry . Advanced Dental Biomaterials. Cham, Switzerland: Elsevier; 2019:55-78.
2. Zakir Muhammad, Tsoi James Kit Hon, Chu Chun Hung, Lung Christie Ying Kei, Matinlinna Jukka Pekka. Bonding Dissimilar Materials in Dentistry . Progress in Adhesion and Adhesives. Hoboken, NJ: John Wiley & Sons; 2015:397-415.
3. Tsoi KH. Digital Dentistry and Dental Informatics . Handbook of Oral Biomaterials. Singapore: Pan Stanford Publishing; 2014:577-604.
4. Tsoi JKH. Using iClass as a tool for journal-based learning (JBL) in teaching dental materials science at MSc level . The new era of e-learning : mobile learning & interactive class for the new curriculum. Hong Kong: University of Hong Kong; 2012:144-147.
5. Tsoi KH. 在牙科材料學科碩士班中運用iClass 進行期刊研讀(Journal-based Learning) . 電子學習, 新世代: 新學制中的移動學習與互動課堂. Hong Kong: Department of Electrical and Electronic Engineering, Faculty of Engineering, The University of Hong Kong; 2012:135-137.

1. Tsoi Kit-hon. Aspects of the statistics of condensation polymer networks[PG Thesis]. Pokfulam, Hong Kong: The University of Hong Kong; 2007. doi:10.5353/th_b3898543

1. 2019. DING H, Li X, Cheung GSP, Tsoi KH, Tsui KH. IADR Kulzer Travel Award: International Association for Dental Research (IADR).
2. 2018. YON JY, Lam YHW, Tsoi KH. The Jonathan Ship Award (Do elderly from developed countries have better Oral health-related quality of life?): IADR Geriatric Oral Research Group.
3. 2018. QIAO W, LAN X, Yeung KWK, Tsoi KH, Matinlinna JP, Su Y. IADR Lion Dental Research Award - Salivary Research: IADR Salivary Research Group.
4. 2017. SAVOLDI F, Tsoi KH, Paganelli C, Matinlinna JP. IADR-SEA Division Research Category Award in Oral Maxillofacial Surgery, Oral Pathology, and Oral Medicine: IADR-SEA Division.
5. 2015. Tsoi KH, Ho BJ, LIU D, Lung YK, Wong HM, Matinlinna JP. IADR SEA Research Category Award - Dental Materials - Laboratory Research: International Association of Dental Research, Southeast Asia Division.
6. 2015. Dian M, Tsoi KH, Matinlinna JP. 2nd runner-up of best poster, HKIDEAS, 2015, Hong Kong: HKIDEAS, organized by Hong Kong Dental Association.
7. 2014. ZHU J, Tsoi KH, Tang ATH, Hagg EUO, Matinlinna JP. IADR Heraeus Kulzer Travel Award: International Association for Dental Research (IADR).

1. 2023: Editorial Board. Coatings.
2. 2023: Editorial board member. Journal of Clinical Medicine - Stomatology Section.
3. 2023: Editorial Board Member. Journal of Oral Science.
4. 2023: Editorial Board Member. Biomaterial Investigations in Dentistry.
5. 2023: Editorial Board Member. Dental Materials.
6. 2023: Associate Editor in Dental Materials. Frontiers in Dental Medicine.
7. 2022: Editorial Board Member. The Journal of Advanced Prosthodontics.
8. 2022: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
9. 2022: Editorial Board. Coatings.
10. 2022: Editorial Board Member. Journal of Functional Biomaterials.
11. 2022: Editorial Board Member. Journal of Oral Science.
12. 2022: Editorial Board Member. Biomaterial Investigations in Dentistry.
13. 2022: Associate Editor in Dental Materials. Frontiers in Dental Medicine.
14. 2022: Editorial Board Member. Dental Materials.
15. 2022: Editorial Board member. JADA Foundational Science.
16. 2022: Editorial board member. Journal of Clinical Medicine - Stomatology Section.
17. 2021: Editorial Board Member. Journal of Oral Science.
18. 2021: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
19. 2021: Editorial Board member. JADA Foundational Science.
20. 2021: Associate Editor in Dental Materials. Frontiers in Dental Medicine.
21. 2021: Editorial Board. Coatings.
22. 2021: Editorial Board Member. Dental Materials.
23. 2021: Editorial Board Member. Biomaterial Investigations in Dentistry.
24. 2021: Editorial board member. Journal of Clinical Medicine - Stomatology Section.
25. 2020: Editorial Board Member. Journal of Oral Science.
26. 2020: Editorial Board Member. Dental Materials.
27. 2020: Editorial Board Member. Biomaterial Investigations in Dentistry.
28. 2020: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
29. 2020: Editorial Board. Coatings.
30. 2020: Associate Editor in Dental Materials. Frontiers in Dental Medicine.
31. 2019: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
32. 2019: Editorial Board. Coatings.
33. 2019: Editorial Board. International Journal of Experimental Dental Science.
34. 2019: Editorial Board. International Journal of Experimental Dental Science.
35. 2019: Editorial Board Member. Current Dentistry.
36. 2019: Editorial Board Member. Journal of Oral Science.
37. 2019: Editorial Board Member. Biomaterial Investigations in Dentistry.
38. 2017: Editorial Board. International Journal of Experimental Dental Science.
39. 2017: Editorial Board. International Journal of Experimental Dental Science.
40. 2017: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
41. 2017: Editorial Board. Coatings.
42. 2016: Editorial Board. International Journal of Experimental Dental Science.
43. 2016: Editorial Board. Coatings.
44. 2016: Editorial Board. International Journal of Experimental Dental Science.
45. 2016: Journal Collection Editor. Journal of Functional Biomaterials - Topical Collection "Biocements for Medical/Dental Purposes".
46. 2016: Special Issue Editor. Coatings - Special issue "Self-assembled Monolayers and Multilayers (SAMs/SAMTs) for Medicine and Dentistry".
47. 2016: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
48. 2015: Editorial Board. International Journal of Experimental Dental Science.
49. 2015: Editorial Board. Coatings.
50. 2015: Editorial Board. International Journal of Experimental Dental Science.
51. 2015: Editorship. Program Booklet. The 4th Trilateral HKU-NDU-SU Dentistry Symposium 2015 "Emerging Topics in Dentistry".
52. 2015: Editorship. Program Booklet. HKU-Tohoku University 1st Bilateral Dental Symposium "Advanced Prosthodontics and Biomaterials Science".
53. 2015: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
54. 2014: Editorial Board. Coatings.
55. 2014: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
56. 2014: Editorial Board. International Journal of Experimental Dental Science.
57. 2014: Editorial Board. International Journal of Experimental Dental Science.
58. 2013: Editorial Advisory Board. International Journal of Adhesion and Adhesives (IJAA).
59. 2013: Edited book (as editor). Programme Booklet, The 1st Asian Symposium on Fibre Reinforced Composite Materials in Dentistry.
60. 2012: Edited book (as editor). Program Booklet, The 1st Trilateral "Zirconia & Titanium Today" Dental Materials Science Symposium, 31 October 2012.
61. 2012: Editorial Board Member. International Journal of Experimental Dental Science.

1. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. RTHK Radio News: 晨早新聞天地.
2. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Hong Kong Economic Journal: 新技術增激光消融腫瘤準確度.
3. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Sing Tao Daily: 中大港大合研機械人治頭頸癌.
4. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Ming Pao Daily: 中大港大研軟體機械人精準滅殺癌腫.
5. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Skypost Daily: 軟體機械人入口腔 精準消滅頭頸癌.
6. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. am730: 手術機械人精準消融頭頸癌.
7. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Headline Daily: 兩大學研「軟體機械人」治頭頸癌.
8. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Hong Kong Economic Times: 兩大研機械人系統 精準治頭頸癌.
9. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Oriental Daily: 兩大學合研系統 軟體機械人活動力強 磁力共振導航激光 更精準滅頭頸癌瘤.
10. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Ta Kung Pao: 中大港大合研軟體機械人專醫頭頸癌.
11. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Wen Wei Po: 鑽咽喉入鼻竇 機械人精準殺癌 中大港大合製系統 最快5年後投入應用.
12. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Lion Rock Daily: 研微細機械人 精準治頭頸癌 中大港大全球首創 健康組織免受清除.
13. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. The Standard: Novel robot eases cancer treatment.
14. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. RTHK English Hong Kong Today: Local researchers develop cancer surgery robot Robotic device available in hospitals within 10 years.
15. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Headline News: 兩大學研「軟體機械人」治頭頸癌.
16. 10 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Headline News: 兩大學研「軟體機械人」治頭頸癌.
17. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Urban Life Health: 【癌症治療】中大、港大合作研發手術機械人　有望增頭頸癌腫瘤手術成功率.
18. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. RTHK English News: Robotic device helps remove tumours in throats.
19. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. RTHK English News: Robotic device helps remove tumours in throats.
20. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Headline News Online: 中大港大合研軟體機械人系統 治療頭頸癌.
21. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. HK01: 港大中大研發MRI手術機械人系統　激光殺頭頸癌腫瘤　準繩度升.
22. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Singtao.com: 中大港大合研軟體機械人系統 治療頭頸癌.
23. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. TOPick: 【癌症治療】中大港大合作研發軟體機械人系統　助更精準治療頭頸癌.
24. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. on.cc: 大學研發軟體機械人系統　有助頭頸癌微創手術.
25. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Hong Kong Economic Journal: 中大港大研軟體機械人系統治頭頸癌.
26. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Skypost Online: 醫學科技｜中大港大合研軟體機械人 伸入口腔激光治頭頸癌.
27. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. RTHK: 中大港大聯合研發「軟體機械人系統」治療頭頸癌.
28. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. OPEN GOV: CUHK and HKU Develop a Soft Robotic Manipulator.
29. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Mirage News: CUHK and HKU Successfully Develop Soft Robotic Manipulator for Intra-operative MRI-guided Transoral Laser Microsurgery.
30. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Wen Wei Po: 港大中大成功合研機械人治療頭頸癌.
31. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Epoch News: 中大港大合作研發軟體機械人系統治療頭頸癌.
32. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Hong Kong China News: 香港兩高校研發機械人系統助治療頭頸癌.
33. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. Ming Pao: 中大港大研手術機械人助治療頭頸腫瘤.
34. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. RTHK:【導航手術機械人利用激光消融頭頸癌腫瘤】現場直播.
35. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, Ng Siu Yan, Ho Justin Di-Lang, Chung Tik Sze, FANG Ge, HE Zhuoliang, WANG Kui, HAO Yifeng. Joint press conference with Faculty of Medicine, The Chinese University of Hong Kong .
36. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. 中大港大合作研軟體機械人系統 可更精準消融狹窄部位腫瘤 .
37. 09 September 2021: Kwok Ka Wai, Tsoi Kit Hon, FANG Ge. TVB News: 中大與港大合研新機械人 提升微創手術消融頭頸癌腫瘤準繩度.
38. 01 October 2018: Dissanayaka Waruna Lakmal, Tsoi Kit Hon, Zhang Chengfei. Empowering secondary school teachers in Hong Kong with the knowledge of tooth-derived stem cells and its potential applications.
39. 01 September 2018: Dissanayaka Waruna Lakmal, Zhang Chengfei, Tsoi Kit Hon. 2018/19 KE Impact Project Funding: KE-IP-2018/19-27: Empowering secondary school teachers in Hong Kong with the knowledge of tooth-derived stem cells and its potential applications ($70,000).
40. 27 July 2018: Tsoi Kit Hon. Lunch and Learning: Digital Dentistry is Here to Stay.
41. 25 July 2018: Tsoi Kit Hon, Umer Daood, Seow, LL, Omer, H, Smales, F. Hands-on Workshop: Teaching is Learning Twice: Peer Assisted Learning In Dental Education.
42. 27 June 2018: Tsoi Kit Hon, Leung Katherine Chiu Man. 自在八點半 牙齒護理及口腔產品選擇.
43. 23 May 2018: Tsoi Kit Hon. 精靈一點 香港大學牙醫學院系列- 口腔產品.
44. 28 March 2018: Tsoi Kit Hon. 牙科的"STEAM" STEAM in dentistry.
45. 28 February 2018: Tsoi Kit Hon. 3D打印在牙科 3D printing in dentistry.
46. 01 February 2018: Jung Han Sung, Lo Edward Chin Man, Chu Chun Hung, Duangthip Duangporn, Wong Hai Ming, Tsoi Kit Hon, Su Yuxiong, Dissanayaka Waruna Lakmal, Lee Hiu Man Gillian, McGrath Colman Patrick Joseph, Yiu Cynthia Kar Yung, Bornstein Michael Marc. Special Funding for Impact Evidence Collection: KE-SR-2017/18-4: Impact Evidence Collection for Clinical Dentistry (HK$400,000).
47. 20 December 2017: Tsoi Kit Hon. 你用的牙線棒安全嗎？Does your floss with handle safe ?.
48. 06 December 2017: Tsoi Kit Hon. 口腔細菌的存在主義 Existentialism of oral bacteria .
49. 22 November 2017: Tsoi Kit Hon. 牙髓新思維 New concepts in endodontics.
50. 20 August 2017: Tsoi Kit Hon. ISO TC 106 meeting.
51. 16 August 2017: Tsoi Kit Hon. 納米科技在牙科的應用 Nanotechnologies in Dental application.
52. 26 April 2017: Tsoi Kit Hon. 不含糖分的藥物對乳齒有害嗎？Does sugar-free drugs harmful to deciduous teeth? .
53. 24 April 2017: Curtin Justin Paul, Matinlinna Jukka Pekka, Tsoi Kit Hon. Materials in Oral Health.
54. 12 April 2017: Tsoi Kit Hon. 牙科教育新發展──慕課(MOOC) New development in dental education - MOOC.
55. 15 August 2016: Tsoi Kit Hon. 2016/17 KE Impact Project Funding: KE-IP-2016/17-18: “Professional Dental Product Review” for Hong Kong dentists (HK$100,000).
56. 24 July 2016: Lam Otto Lok Tao, Tsoi Kit Hon. Better Teeth, Better Health.
57. 07 August 2015: Tsoi Kit Hon, Dissanayaka Waruna Lakmal, Epasinghe Don Jeevanie, Alex Cheng, Dave Kwok, Chu Chun Hung. 2015/16 KE Impact Project Funding: KE-IP-2015/16-28: Oral Health Promotion from Hong Kong to Remote World: Sri Lanka (HK$70,000).
58. 27 April 2015: Tsoi Kit Hon. 你用的電動牙刷安全嗎？Are electric toothbrush safe?.
59. 13 April 2015: Tsoi Kit Hon. 玩樂器或對口腔頜面構成影響 Playing of some musical instruments may have an impact on craniofacial growth.
60. 18 November 2013: Tsoi Kit Hon, Matinlinna Jukka Pekka, Chan Shuk Ching, Chow Tak Wah, Vallittu Pekka Kalevi, Shinya Akikazu, Samaranayake Lakshman Perera, Shinya Akiyoshi, Miyazaki Takashi, Xie Qiufei. 1st Asian Symposium on Fibre Reinforced Composite Materials in Dentistry.
61. 30 September 2013: Tsoi Kit Hon, Betty LIANG, Dora CHU, Snow Liying LUO. 2013/14 Student KE Project Grant Mentor: KE-SP-2013/14-7: “Be an Oral Healthy Musician” – Dental Engagements with Chinese Wind Instrument Players (HK$16,800).
62. 31 October 2012: Tsoi Kit Hon, Matinlinna Jukka Pekka. 1st trilateral "Zirconia & Titanium Today" Dental Materials Science Symposium.

1. Project Title: Design and develop a ‘photon-printing’ method for dental zirconia
   Grant Type: External Grant
   Funding Year: 2021
   Amount: HKD1175732
   Principal Investigator: Dr Tsoi, Kit Hon
   Co-investigator(s): Professor Fan Zhiyong, Dr Pow Edmond Ho Nang, Professor Lohbauer Ulrich
   
2. Project Title: Artificial Intelligence-Design of Maxillary Single-tooth Dental Prostheses
   Grant Type: External Grant
   Funding Year: 2021
   Amount: HKD945740
   Principal Investigator: Dr Lam, Yu Hang Walter
   Co-investigator(s): Dr Luk Wai Kuen, Professor McGrath Colman, Emeritus Professor Wang Wen Ping, Dr Koohimoghadam Mohamad, Dr Hsung Tai Chiu, Dr Tsoi Kit Hon
   
3. Project Title: Multiphasic 3D-printed Bone Structures for Site-specific dental and Craniomaxillofacial Implants
   Grant Type: Seed Fund for Basic Research for New Staff
   Funding Year: 2021
   Amount: HKD150000
   Principal Investigator: Dr Cho, Kiho
   Co-investigator(s): Dr Dissanayaka Waruna Lakmal, Dr Tsoi Kit Hon
   
4. Project Title: Tooth Smart Modeling and Diagnosis from Multimodal Digital Dental Data for Precision Orthodontics and Restorative Dentistry
   Grant Type: External Grant
   Funding Year: 2021
   Amount: HKD1672000
   Principal Investigator: Dr Tsoi, Kit Hon
   Co-investigator(s): Miss Gu Ying, Professor Zhou Yuanfeng, Professor Wang Wenping, Miss Chen Yanning
   
5. Project Title: Using novel monomers to create a BPA free universal resin filling material.
   Grant Type: External Grant
   Funding Year: 2020
   Amount: HKD744220
   Principal Investigator: Professor Burrow, Michael Francis
   Co-investigator(s): Dr He Jingwei, Professor Matinlinna Jukka Pekka, Dr Tsoi Kit Hon
   
6. Project Title: An Artificial Intelligence (AI) approach to automate the design and production processes of dental crown
   Grant Type: External Grant
   Funding Year: 2020
   Amount: HKD996285
   Principal Investigator: Dr Tsoi, Kit Hon
   Co-investigator(s): Emeritus Professor Wang Wen Ping, Dr Fok Alex SL, Dr Pow Edmond Ho Nang
   
7. Project Title: 3D printed dental implants with anti-biofouling surface
   Grant Type: Seed Fund for PI Research – Translational and Applied Research
   Funding Year: 2020
   Amount: HKD150000
   Principal Investigator: Dr Neelakantan, Prasanna
   Co-investigator(s): Professor Su Yuxiong, Professor Burrow Michael Francis, Dr Chu Zhiqin, Dr Pow Edmond Ho Nang, Dr Tsoi Kit Hon
   
8. Project Title: A clinical research in using Artificial Intelligence (AI) to design dental crown
   Grant Type: External Grant
   Funding Year: 2020
   Amount: HKD1392988
   Principal Investigator: Dr Tsoi, Kit Hon
   Co-investigator(s): Miss CHEN Yanning, Dr Pow Edmond Ho Nang
   
9. Project Title: A novel arginine-fluoride varnish for synergistic dental caries prevention
   Grant Type: External Grant
   Funding Year: 2019
   Amount: HKD704007
   Principal Investigator: Professor Yiu, Cynthia Kar Yung
   Co-investigator(s): Dr Tsoi Kit Hon, Dr Ekambaram Manikandan, Dr Neelakantan Prasanna
   
10. Project Title: Enhanced Magnetic Resonance Imaging Guidance for Robotic Transoral Surgery
    Grant Type: External Grant
    Funding Year: 2019
    Amount: HKD436716
    Principal Investigator: Dr Kwok, Ka Wai
    Co-investigator(s): Dr Chan Po Ling, Professor Au Kwok Wai Samuel, Dr Chan Ying Kuen Jason, Dr Chang Hing Chiu Charles, Dr Cheng Yi Yung, Dr Tsoi Kit Hon, Dr Vardhanabhuti Varut
    
11. Project Title: Plaque cleaning apparatus using dental acrylic 3-D printing technique by micro-mist injection for elderly and disabled
    Grant Type: External Grant
    Funding Year: 2018
    Amount: HKD3514000
    Principal Investigator: Dr Tsoi, Kit Hon
    Co-investigator(s): Professor Jung Han Sung, Dr Murbay Sukhdeep, Mr Laosuwan Kittipong, Dr Kawai Taisuke, Professor Sasaki Keiichi, Dr Luk Wai Kuen
    
12. Project Title: Randomised study on rapid maxillary expansion and continuous positive airway pressure in children with residual obstructive sleep apnoea: efficacy and relationship with obstruction type
    Grant Type: External Grant
    Funding Year: 2018
    Amount: HKD1327278
    Principal Investigator: Dr Gu, Min
    Co-investigator(s): Dr Ng Daniel Kwok Keung, Dr Tsoi Kit Hon, Dr Fung Siu Chung, Dr Wong Ricky Wing Kit, Dr Fung Kevin Kin Fen, Dr Mak Wing Sze
    
13. Project Title: MRI-guided Soft Continuum Robotic System for Transoral Laser Microsurgery
    Grant Type: External Grant
    Funding Year: 2017
    Amount: HKD443950
    Principal Investigator: Dr Kwok, Ka Wai
    Co-investigator(s): Dr Tsoi Kit Hon, Professor Wong Kenneth Kin Yip, Dr Chan Ying Kuen Jason
    
14. Project Title: Biomimetic Nano-structured Anti-bacterial Surfaces for Dental Clinical Applications
    Grant Type: External Grant
    Funding Year: 2017
    Amount: HKD1366200
    Principal Investigator: Professor Cheung, Gary Shun Pan
    Co-investigator(s): Professor Fan Zhiyong, Dr Tsoi Kit Hon, Miss Li Xin, Mr Tsui Kwong Hoi
    
15. Project Title: ISO TC 106 Dentistry 53rd Annual meeting
    Grant Type: External Grant
    Funding Year: 2017
    Amount: HKD710440
    Principal Investigator: Dr Tsoi, Kit Hon
    

1. 01 September 2022: Main speaker: Green Smart Manufacturing for Dentistry. 4th ICBD 2022, Universitas Brawijaya, Indonesia.
2. 01 August 2022: Keynote: Clinical Artificial Intelligence in Digital Dentistry. Dentistry International Online Course “Digital Health Transformation for Better Education and Clinical Practice”, Faculty of Dentistry Universitas Gadjah Mada.
3. 01 June 2022: Visiting Professor invited lecture: Current status and research trends in Dental Rehabilitation materials. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
4. 01 June 2022: Visiting Professor invited lecture: Recent developments in prosthetic dental material. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
5. 01 June 2022: Visiting Professor invited lecture: CAD/CAM technology in rehabilitation material. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
6. 01 June 2022: Invited talk "3D metrology for oral and craniofacial rehabilitation". Symposium "Data-driven Surface Metrology for Advancing Oral and Craniofacial Rehabilitation".
7. 01 June 2022: Visiting Professor invited lecture: Potential research in future dental material. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
8. 01 May 2022: Visiting Professor invited lecture: Polymer material for prosthetic dentistry. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
9. 01 May 2022: Visiting Professor invited lecture: Biocompatibility and Properties of material needed for prosthetic dental material. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
10. 01 May 2022: Visiting Professor invited lecture: Metal alloy in prosthetic dentistry. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
11. 01 March 2022: What AI can do for dental materials research?. “Artificial Intelligence (AI) for Dental Materials and Prosthodontics” Symposium in IADR-AACOCR 2022.
12. 01 March 2022: Keynote: Bioinspired and Nano Approaches in Fabricating Antibacterial Polymeric Surfaces. IADR-AADOCR 2022.
13. 01 January 2022: Invited lecture: Smart dental prosthesis production with AI. Post Pandemic Life: Lessons Learned and Future Direction, Universitas Gadjah Mada, Indonesia.
14. 01 November 2021: Keynote: AI in prosthodontics, orthodontics and dental robotics. Korean Society of Dental Materials Annual Conference 2021.
15. 01 July 2021: AI in Prosthodontics and Orthodontics. Special Lecture at SNU School of Dentistry.
16. 01 June 2021: Visiting Professor invited lecture: Ceramic materials for prosthetic dentistry. 3 in 1 visiting professor program, Faculty of Dentistry Universitas Brawijaya, Indonesia.
17. 01 May 2021: Bacterial adhesion on dental ceramics. SDMS-CSA & ADM Joint Hybrid Meeting "Forum on Advanced Dental and Biomaterials".
18. 01 March 2021: HKU AI technologies for restorative dentistry and orthodontics. 3M MDRCBB Lecture Series, University of Minnesota, USA.
19. 01 March 2021: Materials and techniques for digital dentistry. Invited lecture for postgraduate, Faculty of Dentistry, Thammasat University, Thailand.
20. 01 October 2020: Some AI technologies in dental design. 4th International Workshop on Advanced Ceramics and Technologies for Dentistry (ACT4D 2020), Stockholm.
21. 01 August 2020: Artificial Intelligence in Dentistry: Now and Future. Asia Pacific and Dental Students Association (APDSA) webinar series.
22. 01 February 2020: Out-of-classroom learning for HKU dental students - International Capstone Experience.. International Collaborative Symposium on Development of Human Resources in Practical Oral Health and Treatment, Bali, Indonesia.
23. 01 December 2019: CAD/CAM Ceramics in Dentistry. Invited lecture at Shenzhen University General Hospital, Shenzhen, China.
24. 01 January 2019: Invited talk: AI evaluation of initial bacterial adhesion on zirconia. 2019 International Symposium for Interface Oral Health Science.
25. 01 December 2018: Keynote Lecture: Digital Materials in Dentistry. 2018 FJMU Dental Science Symposium, Fujian Medical University School and Hospital of Stomatology.
26. 01 December 2018: Invited Lecture: CAD/CAM in dentistry. Department of Prosthodontics, 9th People's Hospital, Shanghai Jiaotong University.
27. 01 October 2018: Guest Lecture: Dental CAD/CAM ceramics. Tianjin Medical University School of Stomatology.
28. 01 August 2018: Guest lecture: Dental CAD/CAM Materials: approaches, opportunities and messages. Interface Oral Health Science Summer Seminar 2017, Tohoku University, Sendai, Japan.
29. 01 July 2018: Lunch and Learning: Digital Dentistry is Here to Stay. 96th General Session & Exhibition of the IADR, London. 2018.
30. 01 July 2018: Hands-on Workshop: Teaching is Learning Twice; Peer Assisted Leaning in Dental Education. 96th General Session & Exhibition of the IADR, London. 2018.
31. 01 June 2018: Materials Science for Dental Implant. Invited lecture for postgraduate students, Fujian Medical University, Fuzhou, China.
32. 01 May 2018: Keynote speech on "Teaching philosophy of HKU and PBL in dental education". 1st Beijing-Tianjin-Hebei (Jingjinji Metropolitan Region) Dental Skills Competition, Tianjin.
33. 01 April 2018: Invited Lecture on Dental Implant Materials. HKU-SYSU Joint Forum on Dental and Implant Materials Science, Sun Yat-sen University, Guangzhou, China.
34. 01 April 2018: Antibacterial dental materials: mechanism and future. Invited guest lecture, Wonkwang University, College of Dentistry, Iksan, Korea.
35. 01 March 2018: Student life in Hong Kong and at HKU. Invited talk for Undergraduate and Postgraduate, Zhejiang Chinese Medical University.
36. 01 December 2017: Bonding to Zirconia. Invited lecture in 2017 Annual meeting of Fujian Prosthodontic Society, Fuzhou, China.
37. 01 October 2017: Fatigue in Dental CAD/CAM Ceramics. Guest Lecture in Kaohsiung Medical University, Kaohsiung, Taiwan.
38. 01 October 2017: Dental CAD/CAM Ceramics. Invited lecture for postgraduate, Wenzhou Medical University, Wenzhou, China.
39. 01 October 2017: Keynote speech: Teaching and Learning mode in HKU Dental Materials Science. 12th Annual Dental Materials Conference cum 5th Chinese Stomatological Association (CSA) Dental Materials sub-committee meeting, Tianjin.
40. 01 July 2017: Advances in Dental Materials. Guest lecture in Zhengzhou University, Zhengzhou, China.
41. 01 April 2017: The role of Dental materials science research. Invited talk at International Medical University, Kuala Lumpur, Malaysia.
42. 01 April 2017: How to Identify Fake and Falsified Data. Guest lecture at Universiti Kebangsaan Malaysia, Kuala Lumpur, Malaysia.
43. 01 December 2016: Safe materials, safe tests!. Keynote speech at 5th International Symposium on Biomedical Materials, Lahore, Pakistan.
44. 01 April 2016: The static and fatigue behaviours on CAD/CAM ceramics. Guest lecture, Graduate School of Dentistry, Tohoku University, Japan.
45. 01 January 2016: Static and Fatigue behaviours in dental CAD/CAM Ceramics. Guest lecture, Peking University School of Stomatology, P.R. China.
46. 01 November 2015: Computer modelling in dental materials research. 4th Trilateral NDU-SU-HKU Symposium " Emerging Topics in Dentistry", Faculty of Dentistry, University of Hong Kong.
47. 01 October 2015: Electrospun PLLA-based scaffolds: development and future. HKU-Tohoku University 1st Bilateral Dental Symposium, Faculty of Dentistry, University of Hong Kong.
48. 01 September 2015: Surface treatment for dental implant fixture and abutment: nanocoatings and chemistry. Guest lecture, Nanjing Stomatological Hospital, Nanjing University, Nanjing, China.
49. 01 September 2015: PLLA scaffolds – development and characterization. Guest Lecture, Zhejiang University School of Stomatology, Hangzhou, China.
50. 01 April 2015: Oral products for dentistry - standard and challenge. 2015 Spring Scientific Meeting "Preventive Dentistry", College of Dental Surgeons of Hong Kong.
51. 01 January 2015: PLLA Scaffold – development and characterization. Invited lecture, Science Lunchtime Seminar, School of Dentistry, University of Birmingham.
52. 01 January 2015: Fake chemistry or falsified data - error and assurance. Invited lecture to post-graduate students: about methodological problems in studies on dental materials.
53. 01 November 2014: Silanes and other nanocoatings in dentistry @ HKU. Invited lecture on dental materials, Tohoku University Graduate School of Dentistry, Sendai, Japan.
54. 01 November 2014: Biological evaluations of Fibrous PLLA-based scaffolds. Invited seminar for postgraduate students, Cariology and Operative Dentistry, Tokyo Medical and Dental University, Tokyo, Japan.
55. 01 November 2014: Development and characterization of 3D printable fibrous PLLA biocomposites. 2nd Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, Nippon Dental University, Tokyo, Japan.
56. 01 October 2014: It's a small world after all - Silane coating for dental implant adhesion. 1st Global Conference on Biomedical Engineering and 9th Asian-Pacific Conference on Medical and Biological Engineering (Symposium - Innovative Dental Devices).
57. 01 June 2014: Development of osseointegratable electrospun PLLA biocomposite materials. "International Symposium on Biomineralization" in Chonnam National University, Gwangju, South Korea.
58. 01 May 2014: Student Life at Hong Kong and HKU. “Dentistry Life Sharing from the University of Hong Kong” in Zhejiang Chinese Medical University.
59. 15 November 2013: Short-fibre Reinforcement in Orthodontic Baseplate (invited lecture). The 1st Asian Symposium on Fibre Reinforced Composite Materials in Dentistry, 18-19 November 2013.
60. 01 November 2013: Real-time app-learning for dental materials science. 2nd Trilateral Dental Symposium “Dental virtual Education Today” .
61. 01 June 2013: Chemical analysis of human saliva and saliva substitutes. Co-joint research seminar, Sun Yat-Sen University, Faculty of Dentistry, Guangzhou, China.
62. 01 December 2012: Scientific aspect for contemporary resin composite. School of Dentistry, Universitas Muhammadiyah Yogyakarta, Yogyakarta, Indonesia.
63. 01 December 2012: Digital dentistry - a biomaterials interaction. Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia.
64. 26 October 2012: Chemist's view on dental zirconia surface modification (Invited Lecture). The 1st Trilateral Zirconia & Titanium Today" Dental Materials Science Symposium, Hong Kong, 31 October 2012.
65. 01 September 2012: New surface coating for implant materials. Process Chemistry Centre, Åbo Akademi University, Turku, Finland.
66. 01 September 2012: Dental implant surface coating - recent advances. Department of Chemistry, University of Turku, Turku, Finland.

1. 01 August 2018-01 August 2020: Honorary Secretary. South East Asia Academy of Dental Education (SEAADE)
2. 01 July 2018-01 June 2021: Members-at-Large. IADR-DMG (Dental Materials Group)
3. 01 June 2018-01 June 2028: Committee member. ISO/TC 106/SC 03 Terminology
4. 01 June 2018-01 June 2028: Committee member. ISO/TC 106/SC 02 Prosthodontic materials
5. 01 June 2018-01 June 2028: Committee member. ISO/TC 106/SC 06 Dental equipment
6. 01 June 2018-01 June 2028: Committee member. ISO/TC 106/SC 04 Dental instruments
7. 01 June 2018-01 June 2028: Committee member. ISO/TC 106/SC 01 Filling and restorative materials
8. 01 July 2013-01 July 2023: Committee member. ISO/TC 106/SC 09 Dental CAD/CAM systems
9. 01 July 2013-01 July 2023: Committee member. ISO/TC 106/SC 07 Oral care products
10. 01 July 2013-01 July 2023: Committee member. ISO/TC 106 Dentistry
11. 01 September 2012-01 September 2021: Adjudicator. Obscene Articles Tribunal, the Government of the Hong Kong SAR

1. 01 July 2015-30 June 2018: Faculty of Dentistry, Board of the. The teachers who are members of the Faculty and who are full-time employees of the University